EOT & Gantry Cranes
Single-girder, double-girder and gantry cranes to the duty required.
- Single-girder, double-girder and gantry EOT cranes.
Ministry of Railway
EOT Crane Installation & Commissioning
Erection, alignment, load-testing and commissioning of single-girder, double-girder and gantry EOT cranes for railway workshops, depots, industrial and warehousing facilities — from gantry structure to certified handover.
At a glance
- 5–100 T Capacity
- IS 807 / IS 3177
- 125% SWL Load Testing
- Certified Handover
- AMC & Spares Support
- PAN India
Service information
From gantry structure to certified load test
Finex handles the complete overhead-crane package: fabrication of gantry girders, rails, end-carriages and crane structure; erection and precision alignment; power feed via DSL or festoon systems; and pendant, radio or cabin controls.
Every installation is load-tested to 25% above safe working load with a test certificate at handover — then supported through AMC, periodic inspection and spares so your crane stays certified and productive.
- IS 807 / IS 3177 Design
- IS 800 Structure
- IS 9595 / AWS D1.1 Welding
- Certified Load Testing
What we make
What we manufacture and deliver.
Any one of these can be contracted on its own, or the whole interior delivered under a single award against one drawing set and one schedule. Everything listed is manufactured, supplied and installed by us — not sub-let after award.
Crane Structure
Gantry girders, rails, end-carriages and the structure they run on.
- Gantry girders, rails, end-carriages and crane structure fabrication.
Erection & Load Testing
Erection, alignment, load-testing and commissioning on your site.
- Erection, alignment, load-testing and commissioning.
Power, Controls & Support
How it is fed, how it is driven, and what happens after handover.
- Power feed (DSL / festoon), pendant / radio / cabin controls.
- AMC, inspection and spares support.
Standards & compliance
Built to the standards this work is inspected against.
Wording here is deliberate: we design and manufacture to these criteria.
- Design & manufacture to IS 807 (design) and IS 3177 (electric overhead cranes).
- Load testing to 25% above SWL with test certificate.
- Structure to IS 800; welding to IS 9595 / AWS D1.1.
Certificates held
Not what we design to — what we are audited for.
The certificates from our register that apply to this work, each with its issuing body and certificate number. Nothing here is a claim we have not been audited for.
Certificates held Not what we design to — what we are audited and licensed for, with the certificate number on each.
- ISO 9001 Quality management
- ISO 45001 Occupational health & safety
- ISO 14001 Environmental management
- ISO 50001 Energy management
- ZED Gold Zero Defect Zero Effect — Gold
Why Finex
Why departments place this work with us.
01 Built to the drawing
Manufactured against RDSO specifications and the approved IR / ICF / LHB drawing set.
02 Our own plants
More than 1,00,000 sq. ft. across two units near Nashik — fabrication, finishing and assembly in house.
03 Single point of accountability
One contract, one schedule, one name on the handover certificate.
04 Pan-India execution
Delivery, installation and site support anywhere in the country.
FAQ
Questions we get on this scope.
If yours is not here, ask — we would rather answer it properly.
Single-girder EOT (5–20 T, spans 10–25 m), double-girder EOT (20–100 T, spans 15–30 m) and gantry/goliath cranes (5–50 T, spans up to 30 m), with lifting heights of 6–15 m as required.
Yes — gantry girders, rails, end-carriages and complete crane structure fabrication, followed by erection, alignment, power feed (DSL/festoon) and pendant/radio/cabin controls.
Cranes are load-tested to 25% above SWL (safe working load) with a test certificate issued at handover, per IS 3177 requirements.
Design and manufacture to IS 807 and IS 3177; structures to IS 800; welding to IS 9595 / AWS D1.1.
Yes — annual maintenance contracts, periodic inspection and spares support keep your cranes certified and operational.
Send us the drawing.
A tender number, a specification or a drawing set — we will confirm what we can build and by when, within two working days.