Alarm Panels
Panels with the zone and device mapping documented at handover.
- Fire alarm panels with zone and device mapping.
Fire Safety Solutions
Fire Detection, Suppression & Safety Equipment
Detection, suppression and the equipment on the wall — specified against the code the building is inspected against, then installed and commissioned.
At a glance
- Since 2009
- Two plants, 1,00,000+ sq. ft.
- Manufactured in-house
- Supplied & installed
- Delivered pan-India
- Single-contract delivery
Service information
The system the inspector actually walks round.
Fire safety is signed off as a system, not a shopping list. Detection has to reach every compartment, the panel has to tell staff where the alarm is, suppression has to be sized for the risk in that room, and the portable equipment has to be where someone can reach it and in date.
We supply, install and commission the whole set — alarm panel and field devices, sprinkler and hose reel installations, and the fire points with their extinguishers, buckets and axes — and hand over with the commissioning records.
- Detection & Alarm
- Sprinklers & Hose Reels
- Fire Points
- Commissioned & Documented
What we make
What we manufacture and deliver.
Any one of these can be contracted on its own, or the whole interior delivered under a single award against one drawing set and one schedule. Everything listed is manufactured, supplied and installed by us — not sub-let after award.
Detection
Smoke, heat and multi-sensor detectors through occupied and service areas.
- Smoke, heat and multi-sensor detectors throughout occupied and service areas.
Sprinklers & Suppression
Sprinkler installations and water-based suppression.
- Sprinkler installations and water-based suppression.
Risers, Hydrants & Hose Reels
Wet risers, hydrants, landing valves and hose reel boxes.
- Wet risers, hydrants, landing valves and fire hose reel boxes.
Portable Extinguishers
Selected for the risk present, then sited, mounted and signed.
- Portable fire extinguishers — selected for the risk, sited, mounted and signed.
Fire Points & Signage
Buckets, stands, axes and the escape and equipment signage.
- Fire points: buckets, stands, axes and associated equipment.
- Escape and equipment signage.
Standards & compliance
Built to the standards this work is inspected against.
Wording here is deliberate: we design and manufacture to these criteria.
- Design Systems laid out to National Building Code of India Part 4 fire and life safety provisions.
- Detection Fire detection and alarm installations designed to the criteria in IS 2189.
- Suppression Sprinkler and hydrant installations designed to IS 15105 and IS 3844 respectively.
- Certification Test certification is confirmed per contract before supply. Ask us for the current certification position on any door set or system you intend to specify — we will give you a straight answer rather than a brochure claim.
Certificates held
Not what we design to — what we are audited for.
The certificates from our register that apply to this work, each with its issuing body and certificate number. Nothing here is a claim we have not been audited for.
Certificates held Not what we design to — what we are audited and licensed for, with the certificate number on each.
- ISO 9001 Quality management
- ISO 45001 Occupational health & safety
- ISO 14001 Environmental management
- ZED Gold Zero Defect Zero Effect — Gold
Why Finex
Why departments place this work with us.
01 Doors and systems from one organisation
The door sets, the detection, the suppression and the civil work around them can run on one order — so nobody is waiting on another trade to finish before they can start.
02 Made in our own plants
More than 1,00,000 sq. ft. across two units near Nashik. Frames, leaves and finishing stay under our control rather than being sub-let after award.
03 Fitted, not just delivered
A fire door only performs as an installed door set — frame, leaf, ironmongery and seals together. We install and hand over rather than dropping leaves on site.
04 Straight answers on compliance
We will tell you exactly what is certified and what is not before you specify it. An awkward conversation early is cheaper than a rejected inspection.
FAQ
Questions we get on this scope.
If yours is not here, ask — we would rather answer it properly.
We prepare and submit the drawings and documentation the authority asks for, and attend the inspection. The NOC itself is issued by the fire department, not by us — we will not claim otherwise.
Both, under one contract — panel, detectors, sprinklers, hydrants, hose reels and portable equipment. That way nothing falls into the gap between two suppliers.
By the risk in that room rather than a uniform fit-out. The wrong medium on the wrong fire makes things worse, so the schedule is set against what is actually stored or operated in each area.
Yes. Installation is phased and the isolation and working hours agreed with the facility before we start.
Yes. Test and commissioning documentation is handed over with the system, not assembled the week after.
Send us the drawing.
A tender number, a specification or a drawing set — we will confirm what we can build and by when, within two working days.