Lecture Hall Seating
Tiered and flat-floor lecture seating, set out to the hall’s sightlines and gangway requirements.
- Lecture hall seating runs
- Fixed and loose configurations
- Writing surfaces where specified
- Laid out to the hall plan you send us
Ministry of Education
Institutional Furniture
Lecture hall seating, classroom layouts, student chairs, study tables and corridor storage for colleges, universities and training institutes — specified at building scale.
At a glance
- BIS / ISI Licensed
- IS 17631 · 17633 · 17634 · 17636
- AIOTA Ergonomic Assessment
- GreenPro Ecolabel
- FSC Chain of Custody
- Since 2009
Service information
At institution scale, consistency is the specification.
A college orders furniture by the building, not by the room, and the thing that goes wrong is drift: a chair from one batch that does not match the next, a desk height that changes between floors, a finish that ages differently in two wings. Manufacturing the whole order in our own plants on one programme is what prevents that.
The range covers the teaching estate — lecture hall seating, classroom layouts, individual student positions, study tables and the corridor storage between them — under the same BIS licences and the same ergonomic assessment as the rest of our education furniture.
- Lecture Hall Seating
- Building-Scale Consistency
- BIS / ISI Licensed Range
- AIOTA Ergonomic Assessment
What we make
What we manufacture and deliver.
Any one of these can be contracted on its own, or the whole interior delivered under a single award against one drawing set and one schedule. Everything listed is manufactured, supplied and installed by us — not sub-let after award.
Classroom & Seminar Layouts
Complete room sets for teaching and seminar spaces, dimensioned to agree across the building.
- Complete room sets rather than loose items
- Seminar and tutorial configurations
- Consistent dimensions across the estate
- One delivery programme per building
Student Seating
Individual student chairs for teaching rooms, from the AIOTA-assessed education range.
- Institutional student chairs
- Stackable and fixed options
- Covered by our BIS licence to IS 17631:2022
- AIOTA education range assessment AIOTA/ERG/C-206/2025-26
Lecture Room Desking
Desks and writing surfaces for teaching rooms, at the heights the ergonomic assessment sets.
- Lecture and tutorial room desking
- Individual and shared positions
- Covered by our BIS licence to IS 17633:2022
- Heights matched to the seating
Study Tables
Study positions for common rooms, reading areas and departmental spaces.
- Study tables for shared spaces
- Steel-framed construction
- Sized to the room rather than to a catalogue
- Same finish as the teaching range
Corridor Storage
Racking and cabinets for circulation space, which at institution scale is a real quantity.
- Corridor racks and cabinets
- Open and lockable formats
- Covered by our BIS licence to IS 17634:2022
- Powder-coated steel
Standards & compliance
Built to the standards this work is inspected against.
Wording here is deliberate: we design and manufacture to these criteria.
- Work chairs IS 17631:2022 — manufactured under BIS Standard Mark licence CM/L-7700279419.
- Tables and desks IS 17633:2022 — manufactured under BIS Standard Mark licence CM/L-7700279520.
- Storage units IS 17634:2022 — manufactured under BIS Standard Mark licence.
- Ergonomics AIOTA assessment of the education furniture range, certificate AIOTA/ERG/C-206/2025-26.
- Quality management ISO 9001:2015, certificate BN22475/21523, scoped to this product class.
- Green procurement GreenPro Ecolabel, GRIHA Product Catalogue listing and FSC Chain of Custody FSC-C221650.
Certificates held
Not what we design to — what we are audited for.
The certificates from our register that apply to this work, each with its issuing body and certificate number. Nothing here is a claim we have not been audited for.
Certificates held Not what we design to — what we are audited and licensed for, with the certificate number on each.
- IS 17631 Work chairs — ISI licence
- IS 17633 Tables and desks — ISI licence
- IS 17636 Bunk beds — ISI licence
- AIOTA Ergonomics — education range
- GreenPro Green product ecolabel
Why Finex
Why departments place this work with us.
01 Product licences, not just a management system
Four BIS Standard Mark licences against the Indian Standards for work chairs, tables, storage and bunk beds — product-level approvals with their own CM/L numbers, published with the numbers on them.
02 Assessed for ergonomics
The education range holds an Ergonomic Design and Performance assessment from the All India Occupational Therapists’ Association, certificate AIOTA/ERG/C-206/2025-26.
03 Rated for green procurement
A GreenPro Ecolabel from the CII, a GRIHA Product Catalogue listing and FSC Chain of Custody for timber — three separate registers a tender can check independently.
04 Made in our own plants
Steel forming, welding, powder coating, upholstery and assembly all happen across our two plants in Dindori, Nashik — so a campus order is one schedule and one delivery programme, not a chain of suppliers.
FAQ
Questions we get on this scope.
If yours is not here, ask — we would rather answer it properly.
Yes, and that is the scale this line is set up for. The advantage is consistency: one manufacturer, one programme, one finish batch, so the chairs on the third floor match the chairs on the first. Send the building schedule and we will price and programme it as one contract.
From your hall plan. Seating runs, row spacing and gangway widths come off the drawing and the local requirement, not off a standard block repeated across the floor. Send the plan and the capacity and we will set it out before quoting.
Yes — most institutional orders are. Send the drawing, the room layout or just the quantities and the sizes you need. Where an item is a variation on a model covered by one of our BIS licences we will say so, and where it is a fresh design we will say that too, because the two are not the same thing on a tender document.
The same four BIS Standard Mark licences that cover the rest of our range — IS 17631 work chairs, IS 17633 tables and desks, IS 17634 storage and IS 17636 bunk beds — plus the AIOTA ergonomic assessment of the education range and ISO 9001 scoped to this product class. Every number and validity date is published on our certifications page.
Send the bill of quantities, the room schedule or the tender document. You get back a priced scope against your line items and a dated delivery programme, and we will tell you plainly if any part of it is outside what we manufacture rather than quoting it and buying it in later.
Send us the drawing.
A tender number, a specification or a drawing set — we will confirm what we can build and by when, within two working days.