Fire Water Supply System — Installation & Maintenance

Fire Safety Solutions

Fire System Installation & Maintenance

Getting the system in, proving it works, and keeping it working — including the pump room, the water supply and the civil work nobody quotes for.

At a glance

Service information

Installed, commissioned, and still working next year.

Most fire systems fail an inspection for the same reasons: the water supply was never right, the civil work around the pump room was somebody else's scope, or nothing has been serviced since handover. We take those parts of the job rather than leaving them at the edge of the contract.

That means the supply and storage, the connections and pipework, the pump room and the associated civil work — and then the periodic inspection, refilling and servicing that keeps the installation valid after we have gone.

  • Water Supply & Storage
  • Pump Room & Civil Work
  • Commissioning
  • AMC & Servicing
Water Supply Connection — Installation & Maintenance
Water Supply Connection

What we make

What we manufacture and deliver.

Any one of these can be contracted on its own, or the whole interior delivered under a single award against one drawing set and one schedule. Everything listed is manufactured, supplied and installed by us — not sub-let after award.

  • Fire Water Supply

    From the mains through storage to the point the pump takes it.

    • Fire water supply, storage tanks and connection to the mains.
  • Pump Rooms & Pump Sets

    The pump room itself — sets, headers and the pipework around them.

    • Pump rooms, pump sets, headers and associated pipework.
  • Distribution Pipework

    Pipework, valves, hangers and painting through the building.

    • Distribution pipework, valves, hangers and painting.
  • Associated Civil Work

    Foundations, plinths, chambers and builder’s work openings.

    • Associated civil work — foundations, plinths, chambers and builder's work openings.
  • Testing & Commissioning

    Flushing, pressure testing and commissioning before anything is signed off.

    • System testing, flushing, pressure testing and commissioning.
  • Handover & Operating Instructions

    What the facility team is left with, and whether they can use it.

    • Handover documentation and operating instructions for facility staff.
  • Annual Maintenance

    Periodic inspection, servicing and extinguisher refilling under contract.

    • Annual maintenance contracts — periodic inspection, servicing and extinguisher refilling.
Fire Pump Room

Standards & compliance

Built to the standards this work is inspected against.

Wording here is deliberate: we design and manufacture to these criteria.

  • Installation Pipework, hydrant and sprinkler installation work carried out to the criteria in IS 3844 and IS 15105.
  • Water supply Storage and pumping capacity planned against National Building Code of India Part 4 requirements for the occupancy served.
  • Maintenance Periodic inspection and servicing intervals set against the manufacturer's schedule and the code applicable to the installation.
  • Certification Test certification is confirmed per contract before supply. Ask us for the current certification position on any door set or system you intend to specify — we will give you a straight answer rather than a brochure claim.
Manual Call Point & Sounder — Installation & Maintenance
Manual Call Point & Sounder

Certificates held

Not what we design to — what we are audited for.

The certificates from our register that apply to this work, each with its issuing body and certificate number. Nothing here is a claim we have not been audited for.

Certificates held Not what we design to — what we are audited and licensed for, with the certificate number on each.

  • ISO 9001 Quality management BSCIC Certifications Pvt. Ltd. · BN22475/21523 Rev.01
  • ISO 45001 Occupational health & safety
  • ISO 14001 Environmental management
  • ZED Gold Zero Defect Zero Effect — Gold Ministry of MSME · assessed by Conformity India International Pvt. Ltd. · 14072025_402233
All 20 certificates, with issuing bodies and validity dates

Why Finex

Why departments place this work with us.

  • 01

    Doors and systems from one organisation

    The door sets, the detection, the suppression and the civil work around them can run on one order — so nobody is waiting on another trade to finish before they can start.

  • 02

    Made in our own plants

    More than 1,00,000 sq. ft. across two units near Nashik. Frames, leaves and finishing stay under our control rather than being sub-let after award.

  • 03

    Fitted, not just delivered

    A fire door only performs as an installed door set — frame, leaf, ironmongery and seals together. We install and hand over rather than dropping leaves on site.

  • 04

    Straight answers on compliance

    We will tell you exactly what is certified and what is not before you specify it. An awkward conversation early is cheaper than a rejected inspection.

FAQ

Questions we get on this scope.

If yours is not here, ask — we would rather answer it properly.

Yes, and it is usually cheaper that way. Foundations, plinths, chambers and builder's work are the items that most often sit outside a fire contract and hold the whole job up.

Yes — periodic inspection, servicing and extinguisher refilling. The number on our site still works after the handover certificate is signed.

Usually. We survey what is there first and tell you honestly what condition it is in before quoting, rather than taking on a system we cannot stand behind.

Flushing, pressure testing, functional testing of the pumps and devices, and a walk-through with your facility staff. The records are handed over with the system.

Yes. We install, commission and service projects pan-India from our plants near Nashik.

Send us the drawing.

A tender number, a specification or a drawing set — we will confirm what we can build and by when, within two working days.

Call Now WhatsApp